Pellet stoves with groundbreaking technology
The pellet burner, integrated into our stoves, offers one of the cleanest possible ways to heat your home. The technology is based on micro-gasification, also known as pyrolysis, of pellets. Such pyrolysis technology has two distinct phases in the combustion process.
In the first phase, the pellets are converted into charcoal, releasing the volatile gases from the pellets. In the second phase, at the top of the burner, the gas is burned with the help of fresh air. This creates a beautiful flame and ensures exceptionally clean combustion throughout the cycle. A filling of pellets burns for approximately two hours.
To burn pellets
The pellet burner is located underneath the vermiculite plate of the wood stove. To use the pellet option, first remove the vermiculite plate. Then fill the burner with pellets, light them on top, close the door, and enjoy two hours of beautiful flames. The soapstone will accumulate heat and radiate pleasant warmth for up to 12 hours.
To heat with wood
To burn wood in our hybrid stove, cover the pellet burner with the vermiculite plate and place logs on top. Light it and enjoy the efficient combustion. Our technology ensures minimal ash and emissions, while the stones store heat and provide you with long-lasting radiant heat.
Fuel for our hybrid stoves
- Switch between wood and pellets in seconds
- No moving parts, no noise
- No electronics, no maintenance
- Optimal heat accumulation
- Radiant heat for over ten hours
- Over 90% efficiency
- Very low emissions
- Create a new room in your home with our hybrid stoves.
- Impressively clean combustion and a beautiful flame picture!
